Daisy WinterKleen - Mesh Winter Pool Leaf and Debris Cover - GREY 8 Years p.r. Warranty

Daisy WinterKleen - Mesh Winter Pool Leaf and Debris Cover - GREY 8 Years p.r. Warranty

CALL 1800 100 417 TO ORDER

WinterKleen Mesh Pool Cover from Daisy for Winter months to keep leaves and debris out of the Pool - 8 Year Pro Rata Warranty.

  • Daisy WinterKleen uses a fine polypropylene mesh that is strong enough to survive the elements but is lightweight for easy handling. The finished cover is taut across the entire pool overlapping it by 200mm with tie-down toggles, about 800mm apart, anchored a further 200mm from the cover edge. That means that you need of 400mm from your pools edge to install a WinterKleen.
  • The tie-down toggles are easily pulled tight one by one until taut. Leaves and dirt that fall on the cover can be blown or swept off the cover.
  • A WinterKleen Cover comes in 5 colours and comes as square cut to fit over any shaped pool. With extra measurements, a cover can be shaped to the pool.  A WinterKleen comes with an 8 year pro-rata warranty and is easily removed when it's time for a swim.

 

We can manufacture your pool cover to exact shape of your pool. 2 point measuring is required. Please see instruction video:

To get Your Daisy WinterKleen Cover manufactured to the shape of your pool please perform 2 point measuring following the these steps and filling out the form below:

  1. Chalk mark two points  A and  B at the longest point 200mm from the edge of the pool. ( Record total width and length )
  2. Chalk mark and number a series of l points 200mm out from pool edge 1, 2, 3 etc. starting clockwise from A all around to l B about 900mm apart. Closer on tighter curves further apart for straighter edges.
  3. Measure the distances from  A to marked all points and record the distance to every chalk marked. eg. A to  1 = 957mm or 95.7 cm
  4. Measure the distances from l B to marked l points and record the distance to every chalk marked. eg. B to 1 = 8500mm or 850cm
  5. Draw a sketch of the pool outline indicating approximate location of points A and B and the points between.
  6. Email to us your measurements in the table below.
  7. The same method and measurements will be used to make the cover.

NOTE: This measuring procedure applies only to curvilinear pools. If you measure counter clockwise from ‘A’ the cover will be manufactured upside down.
 

 

How to install Daisy WinterKleen Pool Cover?

Daisy's quality products are custom prepared to your selected dimensions.

 - Your order is normally prepared and dispatched within two business days.

 - Not home when the delivery arrives? - Your order will be left in a safe spot.

 - How long does it take for delivery?

Metro Areas:
Allow approx. 4-5 business days - Applies to Sdy, Bris, Melb, Perth & Adelaide.

Regional & Other Areas:
Allow approx. 5-10 business days. Fastest comparable in Australia.

and enter a draw to win Zodiac OT15

Robotic Pool Cleaner valued

and enter a draw to win Zodiac OT15

Robotic Pool Cleaner valued