1800 100 417
(02) 8355 7855 | Opening Times

0 Item(s)
Check Out

Home

Pool Controls

Chemigem D10 CP - Acid Feeder - Single Pump

General
Documentation

Chemigem D10 P Acid Feeder - Single Pump

The Chemigem D10 is suitable for domestic pools of all shapes and sizes and gives you total control over sanitizer levels and pH. The Chemigem uses a multi-electrode (probe) to analyse water quality whenever the system is running and adds precise doses of chlorine and acid to maintain optimum water quality.

Dosing can be via the highly-efficient peristaltic pumps. The Chemigem can also be used to control a salt chlorinator for those who prefer salt or mineral pools.

Fully-Automated Water Management System -

The Chemigem D10 Water Management System measures water quality and adds precise doses of chemicals to ensure that your pool is clean and safe to swim in. With a Chemigem, the “hit and miss” methods of dosing by hand are a thing of the past. Pool water chemistry is regulated automatically – providing optimum levels of water sanitation while using less chlorine and acid. This means you get a better result – and save money!

Whenever your pump is running, your Chemigem is working. The Chemigem tests the water continuously and can add precise doses of chemicals over 30 times each hour if required. The Chemigem measures pH (a measure of the acidity of pool water) and ORP (Oxidation Reduction Potential – a measure of the level of effective chlorine in the water). It is important that both pH and ORP are maintained within a safe range.

Features:

Chlorine and pH controller to operate salt chlorinator for chlorine, with pH controlled via a single peristaltic pump.

All D10 pump models have the ability to control salt pools as well as fresh water pools (liquid Chlorine)
Work well on low speed pumps
Work well on flooded suction pools
Can be plumbed in after the pool heater
Single long life salt probe which reduces cost to the consumer

Warranty - 3 years

Please Note - Image is for illustration purposes only.

Chemigem D10 P Brochure

View

Chemigem D10 P Manual

View

AVAILABLE IN-STORE ONLY

General
Documentation

Chemigem D10 P Acid Feeder - Single Pump

Dosing can be via the highly-efficient peristaltic pumps. The Chemigem can also be used to control a salt chlorinator for those who prefer salt or mineral pools.

Fully-Automated Water Management System -

Features:

Chlorine and pH controller to operate salt chlorinator for chlorine, with pH controlled via a single peristaltic pump.

All D10 pump models have the ability to control salt pools as well as fresh water pools (liquid Chlorine)
Work well on low speed pumps
Work well on flooded suction pools
Can be plumbed in after the pool heater
Single long life salt probe which reduces cost to the consumer

Warranty - 3 years

Please Note - Image is for illustration purposes only.

Chemigem D10 P Brochure

View

Chemigem D10 P Manual

View