Abgal Oasis CLARITY 400 micron CLEAR Pool Cover | Solar Blanket - 5 Years Warranty

Abgal Oasis CLARITY 400 Micron Clear Solar Pool Cover

This highly translucent solar cover lets you see into the pool without lifting the blanket. By allowing more sunlight into the water, it helps speed up warming while preventing up to 99.84% of evaporation.

FEATURES

Crystal-Clear Visibility

Clear bubble design maintains a clean look and makes waterline checks easy.

Faster Solar Gain

High light transmission lets more of the suns energy reach the water for quicker temperature rise.

Key Features

• Translucent clear bubble
• 400 micron construction
• Prevents up to 99.84% of evaporation
• Reduces chemical consumption
• Climate Care Certified, Smart Approved WaterMark, Waterwise Licensed

Package Contents

• 1 x Abgal Oasis Clarity 400 micron clear solar pool cover

How do I measure my pool to know what size solar blanket I need?

To measure your pool for a solar cover, simply measure the pool length (at the longest point) and width (at the widest point), treating the pool as a large rectangle. The pool cover sits inside the pool and floats on top of the water, so take your measurements from inside the pool, at the waterline. We add a little extra when we make it to allow for any shrinkage and so that you can leave the solar cover to roll up the inside of the pool wall slightly to stop leaves from falling into the water.

Most of the time, a pool is just measured as if it is a straight rectangle. The cover is supplied as a rectangle, and you trim it to shape on your pool once it arrives.

However, if you have a step out on one edge, that creates a lot of wastage, so you can opt to have a step piece welded on separately. To do this, your pool shop will need to know the length and width of the main cover, the length and width of the step, and also the exact position of the step (Left flush, Right flush, Offset left, or Offset right). We also recommend a diagram be supplied to avoid issues, because solar covers are not reversible, and you can’t just flip them over if it’s backwards. The flat side faces up, and the bubble side faces down into the water.

Covers supplied this way will also need to be trimmed to an exact fit.