Abgal Oasis 550 micron Pool Cover | Solar Blanket - 10 Years Warranty

Abgal Oasis 550 Micron Blue Solar Pool Cover

A deep blue, extra-heavy 550 micron solar blanket designed for superior durability and heat performance. It helps the sun warm your pool by up to 7C while cutting chemical loss and preventing up to 99.84% of evaporation.

FEATURES

Heavy-Duty Heating

Thick bubble layer captures and holds solar energy to extend your swimming season.

Durable Construction

UV stabilised material stands up to strong sun and daily use.

Key Features

• Deep blue translucent finish
• Extra heavy 550 micron bubble
• Helps warm water by up to 7C
• Prevents up to 99.84% of evaporation
• Climate Care Certified, Smart Approved WaterMark, Waterwise Licensed

Package Contents

• 1 x Abgal Oasis 550 micron blue solar pool cover

How do I measure my pool to know what size solar blanket I need?

To measure your pool for a solar cover, simply measure the pool length (at the longest point) and width (at the widest point), treating the pool as a large rectangle. The pool cover sits inside the pool and floats on top of the water, so take your measurements from inside the pool, at the waterline. We add a little extra when we make it to allow for any shrinkage and so that you can leave the solar cover to roll up the inside of the pool wall slightly to stop leaves from falling into the water.

Most of the time, a pool is just measured as if it is a straight rectangle. The cover is supplied as a rectangle, and you trim it to shape on your pool once it arrives.

However, if you have a step out on one edge, that creates a lot of wastage, so you can opt to have a step piece welded on separately. To do this, your pool shop will need to know the length and width of the main cover, the length and width of the step, and also the exact position of the step (Left flush, Right flush, Offset left, or Offset right). We also recommend a diagram be supplied to avoid issues, because solar covers are not reversible, and you can’t just flip them over if it’s backwards. The flat side faces up, and the bubble side faces down into the water.

Covers supplied this way will also need to be trimmed to an exact fit.